[. . . ] If you require any advice or assistance regarding your Sharp product, please visit our website www. sharp. co. uk/customersupport. aspx. [. . . ] If you require any advice or assistance regarding your Sharp product, please visit our website www. sharp. co. uk/customersupport. aspx. Customers without Internet access may telephone 0845 880 0512 during office hours (or (01) 676 0648 if telephoning from Ireland). HT-DV50H3 To install the speaker stand 1 Align the hole on the speaker stand to the hole on speaker. Fix them securely with the special screw provided. 2 Route the speaker wire through the speaker stand hole. Close the cover. 1 4 7 2 5 8 +10 3 6 9 SPORT NIGHT BASS TREBLE 1 Press the ON/STAND-BY button to turn the power on. Press the ON/STAND-BY button again to set the unit to the stand-by mode. 0 +10 Installation image: Speakers (left and right) 2 Press the DVD/CD button to set the input to "DVD". NO DISC Unit Subwoofer L If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. 3 Insert the disc into the disc slot, label side up. 4 Note: If playback does not start, press the DVD/CD button. If neither operation above restores the unit, clear all the memory by resetting it. L Factory reset, clearing all memory 1 Press the ON/STAND-BY button to enter the power stand-by mode. 2 Whilst pressing down the c button, press the ON/STAND-BY button until "CLEAR ALL" appears. Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset and CD programme. [. . . ] 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. 3 Insert the disc into the disc slot, label side up. 4 Note: If playback does not start, press the DVD/CD button. If neither operation above restores the unit, clear all the memory by resetting it. L Factory reset, clearing all memory 1 Press the ON/STAND-BY button to enter the power stand-by mode. [. . . ]